G2H Raumsensor
G2H Raumsensor
here to see your conditions
here to see your conditions

G2H Room Sensor RS-HTGS-LoRa

The room sensor is a completely new solution and only requires a power connection (is normally placed in a conventional switch box). The connection to the base module, i.e. the heating control, takes place via a LoRa radio connection. Functions: – Humidity, – Room temperature, – Floor temperature via Infrarot

SKU: RS-HTGS-LoRa Category: Tags: , , , , , ,

The room sensor is a completely new solution and only requires a power connection (is normally placed in a conventional switch box). The connection to the base module, i.e. the heating control, takes place via a LoRa radio connection.

Don’t worry, this isn’t a constant radio connection. This means that the connection is only established when measurement data is sent to the heating control. Only when the room sensor sends data to the heating control it is able to receive changes, otherwise it “sleeps”. The following measurements are carried out:

  • Humidity
  • Room temperature
  • Floor temperature via Infrarot
  • All measurements are sent twice per hour to the heating control (LoRaWAN Version every 5 minutes to eusatec Cloud service)

Technical data:

Nominal voltage HTC6LoRa 5V 200mA max. integrated power supply 230V DC, 0,2A
ownconsumption 0,00052W at 5V = 175 µA = 0,000 104 Ampere [A]
Funk LoRa, AcSiP Technology Corp. AI50H, can achieve a senitivity of over -136dBm. Max. outputpower +21dBm ISM Band, 868 Mhz,
Ambient temperature -10°C – +60°C
LoRaWAN Vers. 1.0.3, Class A, end to end encyption (AES-CTR)
*LoRaWAN downlink
 every minute (settings received from the cloud service, e.g. on/off command, temperature changes)
*Max. switching Voltage 240VAC
*Max. switching Current 10A DC
Bus systems I2C, One-Wire

* only for LoRaWAN version, this function is deactivated for the LoRA-Direct (peer to peer) version!

Weight 0,080 kg
LoRa Version (LoRaWAN/ LoRa p2p)

,

Related products

Scroll to Top