The room sensor is a completely new solution and only requires a power connection (is normally placed in a conventional switch box). The connection to the base module, i.e. the heating control, takes place via a LoRa radio connection.
Don’t worry, this isn’t a constant radio connection. This means that the connection is only established when measurement data is sent to the heating control. Only when the room sensor sends data to the heating control it is able to receive changes, otherwise it “sleeps”. The following measurements are carried out:
-
Humidity
-
Room temperature
-
Floor temperature via Infrarot
-
All measurements are sent twice per hour to the heating control
Technical data:
| Nominal voltage HTC6LoRa | 5V 200mA max. integrated power supply 230V DC, 0,2A |
| ownconsumption | 0,00052W at 5V = 175 µA = 0,000 104 Ampere [A] |
| Funk | LoRa, Murata CMWX1ZZABZ, ISM Band, 868 Mhz, ~100mA peak during +20dBm transmit, ~30mA during active radio listening. +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software) |
| Ambient temperature | -10°C – +60°C |
| Bus systems | I2C |
